1 Ocak 2009 Dergi makalesi Açık Erişim

Birol, Yucel

Dublin Core

<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:creator>Birol, Yucel</dc:creator>
  <dc:date>2009-01-01</dc:date>
  <dc:description>The response to thermal exposure of ball-milled Al/K2TiF6/KBF4 powder blends was investigated to explore the potential of PM processing for the manufacture of Al-Ti-B alloys. K2TiF6 starts to be reduced by aluminium as early as 220 degrees C when ball-milled Al/K2TiF6/KBF4 powder blends are heated. The reaction of KBF4 with aluminium follows soon after. The Ti and B thus produced are both solutionized in aluminium before precipitating out as Al3Ti and TiB2. All these reactions take place below the melting point of aluminium. The ball-milled Al/K2TiF6/KBF4 powder blends heat treated at approximately 525 degrees C can be compacted to produce Al-Ti-B pellets with in situ formed Al3Ti and TiB2 particles. These pellets are shown to be adequate grain refiners for aluminium alloys. (C) 2009 Elsevier B.V. All rights reserved.</dc:description>
  <dc:identifier>https://aperta.ulakbim.gov.trrecord/96823</dc:identifier>
  <dc:identifier>oai:zenodo.org:96823</dc:identifier>
  <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
  <dc:rights>http://www.opendefinition.org/licenses/cc-by</dc:rights>
  <dc:source>JOURNAL OF ALLOYS AND COMPOUNDS 480(2) 311-314</dc:source>
  <dc:title>Al-Ti-B grain refiners via powder metallurgy processing of Al/K2TiF6/KBF4 powder blends</dc:title>
  <dc:type>info:eu-repo/semantics/article</dc:type>
  <dc:type>publication-article</dc:type>
</oai_dc:dc>