1 Ocak 2009 Dergi makalesi Açık Erişim

Birol, Yucel

Citation Style Language JSON

{
  "DOI": "10.1016/j.jallcom.2009.01.091", 
  "abstract": "The response to thermal exposure of ball-milled Al/K2TiF6/KBF4 powder blends was investigated to explore the potential of PM processing for the manufacture of Al-Ti-B alloys. K2TiF6 starts to be reduced by aluminium as early as 220 degrees C when ball-milled Al/K2TiF6/KBF4 powder blends are heated. The reaction of KBF4 with aluminium follows soon after. The Ti and B thus produced are both solutionized in aluminium before precipitating out as Al3Ti and TiB2. All these reactions take place below the melting point of aluminium. The ball-milled Al/K2TiF6/KBF4 powder blends heat treated at approximately 525 degrees C can be compacted to produce Al-Ti-B pellets with in situ formed Al3Ti and TiB2 particles. These pellets are shown to be adequate grain refiners for aluminium alloys. (C) 2009 Elsevier B.V. All rights reserved.", 
  "author": [
    {
      "family": "Birol", 
      "given": " Yucel"
    }
  ], 
  "container_title": "JOURNAL OF ALLOYS AND COMPOUNDS", 
  "id": "96823", 
  "issue": "2", 
  "issued": {
    "date-parts": [
      [
        2009, 
        1, 
        1
      ]
    ]
  }, 
  "page": "311-314", 
  "title": "Al-Ti-B grain refiners via powder metallurgy processing of Al/K2TiF6/KBF4 powder blends", 
  "type": "article-journal", 
  "volume": "480"
}