1 Ocak 2021 Dergi makalesi Açık Erişim

Ilhan, S.; Tuzun, D.; Ozdemir, A.

Dublin Core

<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:creator>Ilhan, S.</dc:creator>
  <dc:creator>Tuzun, D.</dc:creator>
  <dc:creator>Ozdemir, A.</dc:creator>
  <dc:date>2021-01-01</dc:date>
  <dc:description>This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.</dc:description>
  <dc:identifier>https://aperta.ulakbim.gov.trrecord/233642</dc:identifier>
  <dc:identifier>oai:aperta.ulakbim.gov.tr:233642</dc:identifier>
  <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
  <dc:rights>http://www.opendefinition.org/licenses/cc-by</dc:rights>
  <dc:source>IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION 28(2) 414-422</dc:source>
  <dc:title>Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers</dc:title>
  <dc:type>info:eu-repo/semantics/article</dc:type>
  <dc:type>publication-article</dc:type>
</oai_dc:dc>