1 Ocak 2021 Dergi makalesi Açık Erişim

Ilhan, S.; Tuzun, D.; Ozdemir, A.

Citation Style Language JSON

{
  "DOI": "10.1109/TDEI.2020.009183", 
  "abstract": "This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.", 
  "author": [
    {
      "family": "Ilhan", 
      "given": " S."
    }, 
    {
      "family": "Tuzun", 
      "given": " D."
    }, 
    {
      "family": "Ozdemir", 
      "given": " A."
    }
  ], 
  "container_title": "IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION", 
  "id": "233642", 
  "issue": "2", 
  "issued": {
    "date-parts": [
      [
        2021, 
        1, 
        1
      ]
    ]
  }, 
  "page": "414-422", 
  "title": "Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers", 
  "type": "article-journal", 
  "volume": "28"
}