1 Ocak 2014 Dergi makalesi Açık Erişim

Mazman, Muhsin; Cuhadar, Omur; Uzun, Davut; Avci, Ercan; Bicer, Emre; Kaypmaz, Tevhit Cem; Kadiroglu, Umit

JSON-LD (schema.org)

{
  "@context": "https://schema.org/", 
  "@id": 90525, 
  "@type": "ScholarlyArticle", 
  "creator": [
    {
      "@type": "Person", 
      "affiliation": "TUBITAK Marmara Res Ctr, Energy Inst, Gebze, Kocaeli, Turkey", 
      "name": "Mazman, Muhsin"
    }, 
    {
      "@type": "Person", 
      "affiliation": "Kocaeli Univ, Fac Arts & Sci, Dept Chem, Kocaeli, Turkey", 
      "name": "Cuhadar, Omur"
    }, 
    {
      "@type": "Person", 
      "affiliation": "TUBITAK Marmara Res Ctr, Energy Inst, Gebze, Kocaeli, Turkey", 
      "name": "Uzun, Davut"
    }, 
    {
      "@type": "Person", 
      "affiliation": "TUBITAK Marmara Res Ctr, Energy Inst, Gebze, Kocaeli, Turkey", 
      "name": "Avci, Ercan"
    }, 
    {
      "@type": "Person", 
      "affiliation": "TUBITAK Marmara Res Ctr, Energy Inst, Gebze, Kocaeli, Turkey", 
      "name": "Bicer, Emre"
    }, 
    {
      "@type": "Person", 
      "affiliation": "TUBITAK Marmara Res Ctr, Energy Inst, Gebze, Kocaeli, Turkey", 
      "name": "Kaypmaz, Tevhit Cem"
    }, 
    {
      "@type": "Person", 
      "affiliation": "Kocaeli Univ, Fac Arts & Sci, Dept Chem, Kocaeli, Turkey", 
      "name": "Kadiroglu, Umit"
    }
  ], 
  "datePublished": "2014-01-01", 
  "description": "Optimization of the LiFePO4 cathode active material synthesis process in the hydrothermal method consists of many factors, including pH, carbon coating, particle size optimization, sintering and hydrothermal synthesis temperature. The main goal of this study is to determine the effect of particle size, pH and carbon coating on capacity and cycle performance. In this study, LiFePO4 cathode active materials were prepared at different pH (6.5 and 8.5) and temperature (160 and 180 degrees C) levels using the hydrothermal method. The hydrothermal synthesis products were sintered at 400, 500, 600, and 700 degrees C with 5% and 7% carbon source. The initial discharge capacity was observed as 130 mAh g(-1) for the sample that was sintered at 700 degrees C. However, a 14% capacity loss was measured after 100 cycles. Additionally, the sample was ground for 10 h in a ball mill and sintered at 700 degrees C. The capacity was then increased to 151 mAh g(-1) and the capacity loss was measured as 7% (140 mAh g(-1)) after 200 cycles.", 
  "headline": "Optimization of LiFePO4 synthesis by hydrothermal method", 
  "identifier": 90525, 
  "image": "https://aperta.ulakbim.gov.tr/static/img/logo/aperta_logo_with_icon.svg", 
  "license": "http://www.opendefinition.org/licenses/cc-by", 
  "name": "Optimization of LiFePO4 synthesis by hydrothermal method", 
  "url": "https://aperta.ulakbim.gov.tr/record/90525"
}