1 Ocak 2018 Dergi makalesi Açık Erişim

Pekcokguler, Naci; Dundar, Gunhan; Torun, Hamdi; Yalcinkaya, Arda D.

Citation Style Language JSON

{
  "DOI": "10.1016/j.vlsi.2017.12.004", 
  "abstract": "This paper presents physical lumped element models for the structures employing a split-ring resonator (SRR) coupled with a pair of microstrip antennas. The results of 3D EM simulations, circuit simulations and measurement results are provided. For experimental verification, a resonator device was fabricated on an FR4 epoxy glass substrate. Mismatch between the values of resonant frequency that are predicted by the models and that are measured is less than 3%. As a benchmarking case for the proposed model, a reference oscillator was designed and implemented. A phase noise of similar to 139.51 dBc/Hz at 3 MHz frequency offset was measured with a center frequency of 1.617 GHz.", 
  "author": [
    {
      "family": "Pekcokguler", 
      "given": " Naci"
    }, 
    {
      "family": "Dundar", 
      "given": " Gunhan"
    }, 
    {
      "family": "Torun", 
      "given": " Hamdi"
    }, 
    {
      "family": "Yalcinkaya", 
      "given": " Arda D."
    }
  ], 
  "container_title": "INTEGRATION-THE VLSI JOURNAL", 
  "id": "32461", 
  "issued": {
    "date-parts": [
      [
        2018, 
        1, 
        1
      ]
    ]
  }, 
  "page": "160-166", 
  "title": "A novel equivalent circuit model for split ring resonator with an application of low phase noise reference oscillator", 
  "type": "article-journal", 
  "volume": "61"
}