17 Ekim 2014 Dergi makalesi Açık Erişim

Arslan, Hüseyin

MARC21 XML

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">Mechanical alloyingphase transitionsmartensitic transformationball millingCu-Sn alloys.</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2">opendefinition.org</subfield>
  </datafield>
  <datafield tag="041" ind1=" " ind2=" ">
    <subfield code="a">eng</subfield>
  </datafield>
  <controlfield tag="005">20240220135518.0</controlfield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="z">md5:1646b1813d35e9e3b2a10cc29527df6e</subfield>
    <subfield code="s">1092133</subfield>
    <subfield code="u">https://aperta.ulakbim.gov.trrecord/263648/files/A-9 Journal of Advanced Thermal Science Research, 2014-Arslan.pdf</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="o">oai:aperta.ulakbim.gov.tr:263648</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">&lt;p&gt;Abstract&lt;/p&gt;

&lt;p&gt;In the present study, Cu-25 wt %Sn alloy samples were prepared by the mechanical alloying process using planetary high-energy ball mill. The alloy formation and different physical properties associated with their formations were investigated as a function of milling times of 0, 10, 20, 70, 80, 100, 120, 150 and 200 h by means of the x-ray diffraction (XRD) technique, scanning electron microscopy (SEM) and differential scanning calorimeter (DSC). After milling time of 80 h, the complete formation of martensite transformation is observed. When milling time increases from 70 to 120 h, the grain size decreases from 20.8 to 8.6 nm, while the strain increases from 4.73 % to 7.59 %. It is inferred that the martensite volume fraction increases from 30 to 55 % when milling time increases from 20 to 200 h. Moreover, by using SEM the grain morphologies at different formation stages during ball milling are observed.&lt;/p&gt;</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.15377/2409-5826.2014.01.01.4</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Structural Evolution Properties of Cu-25 wt %Sn Alloy During Ball Milling</subfield>
  </datafield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="a">Creative Commons Attribution Share-Alike</subfield>
    <subfield code="u">http://www.opendefinition.org/licenses/cc-by-sa</subfield>
  </datafield>
  <controlfield tag="001">263648</controlfield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2014-10-17</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="0">(orcid)0000-0003-1509-7725</subfield>
    <subfield code="a">Arslan, Hüseyin</subfield>
    <subfield code="u">Kahramanmaraş Sütçü İmam Üniversitesi</subfield>
  </datafield>
</record>