1 Ocak 2022 Dergi makalesi Açık Erişim

Aydin, H.; Altay, M.; Karsi, A.; Ergin, D.; Onayli, A.; Bayram, A.

DataCite XML

<?xml version='1.0' encoding='utf-8'?>
<resource xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://datacite.org/schema/kernel-4" xsi:schemaLocation="http://datacite.org/schema/kernel-4 http://schema.datacite.org/meta/kernel-4.1/metadata.xsd">
  <identifier identifierType="DOI">10.48623/aperta.255903</identifier>
  <creators>
    <creator>
      <creatorName>Aydin, H.</creatorName>
      <givenName>H.</givenName>
      <familyName>Aydin</familyName>
      <affiliation>Bursa Uludag Univ, Mech Engn Dept, Engn Fac, TR-16059 Gorukle, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Altay, M.</creatorName>
      <givenName>M.</givenName>
      <familyName>Altay</familyName>
      <affiliation>Bursa Uludag Univ, Mech Engn Dept, Engn Fac, TR-16059 Gorukle, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Karsi, A.</creatorName>
      <givenName>A.</givenName>
      <familyName>Karsi</familyName>
      <affiliation>Coskunoz R&amp;D Ctr, TR-16140 Bursa, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Ergin, D.</creatorName>
      <givenName>D.</givenName>
      <familyName>Ergin</familyName>
      <affiliation>Coskunoz R&amp;D Ctr, TR-16140 Bursa, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Onayli, A.</creatorName>
      <givenName>A.</givenName>
      <familyName>Onayli</familyName>
      <affiliation>Coskunoz R&amp;D Ctr, TR-16140 Bursa, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Bayram, A.</creatorName>
      <givenName>A.</givenName>
      <familyName>Bayram</familyName>
      <affiliation>Bursa Uludag Univ, Mech Engn Dept, Engn Fac, TR-16059 Gorukle, Turkey</affiliation>
    </creator>
  </creators>
  <titles>
    <title>Effect Of Laser Cladding Parameters In Laser Direct Metal Deposition (Ldmd) Of Martensitic Stainless Steel Powder On Ductile Cast Iron</title>
  </titles>
  <publisher>Aperta</publisher>
  <publicationYear>2022</publicationYear>
  <dates>
    <date dateType="Issued">2022-01-01</date>
  </dates>
  <resourceType resourceTypeGeneral="Text">Journal article</resourceType>
  <alternateIdentifiers>
    <alternateIdentifier alternateIdentifierType="url">https://aperta.ulakbim.gov.tr/record/255903</alternateIdentifier>
  </alternateIdentifiers>
  <relatedIdentifiers>
    <relatedIdentifier relatedIdentifierType="DOI" relationType="IsVersionOf">10.48623/aperta.255902</relatedIdentifier>
  </relatedIdentifiers>
  <rightsList>
    <rights rightsURI="http://www.opendefinition.org/licenses/cc-by">Creative Commons Attribution</rights>
    <rights rightsURI="info:eu-repo/semantics/openAccess">Open Access</rights>
  </rightsList>
  <descriptions>
    <description descriptionType="Abstract">Laser cladding is an additive manufacturing (AM) method based on melting the powder material using a laser beam and penetrating the substrate. In this study FGS600-3A ductile cast iron base material was used in sheet metal forming moulds was clad with 42C martensitic stainless steel powder. The effect of laser power and scanning speed process parameters were investigated on cladding quality in terms of porosity. Porosity on the cladding was analysed quantitatively with the digital image processing method. Also, the stresses and distortions on the cladding were simulated with Simufact Additive software. Optimum process parameters for minimum porosity were analysed using Regression Analysis, Factor Regression, and Response Surface Regression methods. Lower laser power and higher scanning speed, namely lower energy input, have led to lower porosity and distortion. The welding parameters of 1.37 kW laser power and 14 mm/s scanning speed (corresponding to 32.62 J/mm(2) energy input) were obtained as an optimum process parameters for minimum porosity. The results obtained from the simulation study: Higher energy input resulted in greater distortion, effective and principal stresses. In three layers-multi rows, equivalent and maximum principal stresses occurred at the regions between the cladding rows, especially at sub layers. On the other hand, the distortion was greater in the upper layers, where the stresses are lower.</description>
  </descriptions>
</resource>