1 Ocak 2021 Dergi makalesi Açık Erişim

Oztan, Cagri Y.; Hamawandi, Bejan; Zhou, Yiqun; Ballikaya, Sedat; Toprak, Muhammet S.; Leblanc, Roger M.; Coverstone, Victoria; Celik, Emrah

MARC21 XML

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="p">user-tubitak-destekli-proje-yayinlari</subfield>
    <subfield code="o">oai:aperta.ulakbim.gov.tr:234728</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">As an earth-abundant, inexpensive and non-toxic compound, Copper Selenide (Cu2Se) is a frequently investigated material for thermoelectric (TE) conversion applications. In this research, stoichiometric Cu2Se compounds were systematically doped with gel-like Carbon Dots (CDs), that were fabricated using a rapid and straightforward solvothermal method, at weight ratios of 2, 5 and 10%. The resultant ingots were spark plasma sintered and their TE performance was characterized. Scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDX) and powder X-ray diffraction (PXRD) were used to correlate the microstructure to the TE properties. Based on these measurements, CD doping strategy on Cu2Se yielded highly compacted, single phase grains with minimal oxidation. Characterization demonstrated a continuous enhancement of TE figure of merit (ZT) to a maximum of 2.1 at the optimum dopant ratio of 2 wt %. This enhancement was mainly due to the energy filtering effect of CD interfaces along the grain boundaries, and phonon scattering which increased the Seebeck coefficient and reduce the thermal conductivity. Doping beyond 2 wt% was recorded to inhibit this improvement. This research paved the path towards broader utilization of rapidly fabricated CDs to enhance TE conversion performance. (C) 2020 Elsevier B.V. All rights reserved.</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
  </datafield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="a">Creative Commons Attribution</subfield>
    <subfield code="u">http://www.opendefinition.org/licenses/cc-by</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="a">Oztan, Cagri Y.</subfield>
    <subfield code="u">Univ Miami, Dept Mech &amp; Aerosp Engn, Coral Gables, FL 33124 USA</subfield>
  </datafield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="z">md5:86b71593f6d5f7733d4bf7f1c45dc0f8</subfield>
    <subfield code="s">243</subfield>
    <subfield code="u">https://aperta.ulakbim.gov.trrecord/234728/files/bib-09e0c836-1ae7-4c0e-aecf-ca7860c061c9.txt</subfield>
  </datafield>
  <controlfield tag="005">20221007090648.0</controlfield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2021-01-01</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.1016/j.jallcom.2020.157916</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Thermoelectric performance of Cu2Se doped with rapidly synthesized gel-like carbon dots</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="4">
    <subfield code="v">864</subfield>
    <subfield code="p">JOURNAL OF ALLOYS AND COMPOUNDS</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2">opendefinition.org</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Hamawandi, Bejan</subfield>
    <subfield code="u">KTH Royal Inst Technol, Dept Appl Phys, SE-10691 Stockholm, Sweden</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Zhou, Yiqun</subfield>
    <subfield code="u">Univ Miami, Dept Chem, Coral Gables, FL 33124 USA</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Ballikaya, Sedat</subfield>
    <subfield code="u">Istanbul Univ, Dept Phys, TR-34135 Istanbul, Turkey</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Toprak, Muhammet S.</subfield>
    <subfield code="u">KTH Royal Inst Technol, Dept Appl Phys, SE-10691 Stockholm, Sweden</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Leblanc, Roger M.</subfield>
    <subfield code="u">Univ Miami, Dept Chem, Coral Gables, FL 33124 USA</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Coverstone, Victoria</subfield>
    <subfield code="u">Univ Miami, Dept Mech &amp; Aerosp Engn, Coral Gables, FL 33124 USA</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="a">Celik, Emrah</subfield>
    <subfield code="u">Univ Miami, Dept Mech &amp; Aerosp Engn, Coral Gables, FL 33124 USA</subfield>
  </datafield>
  <controlfield tag="001">234728</controlfield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">user-tubitak-destekli-proje-yayinlari</subfield>
  </datafield>
</record>