1 Ocak 2020 Dergi makalesi Açık Erişim

Canbek, Ogulcan; Shakouri, Sahra; Erdogan, Sinan T.

DataCite XML

<?xml version='1.0' encoding='utf-8'?>
<resource xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://datacite.org/schema/kernel-4" xsi:schemaLocation="http://datacite.org/schema/kernel-4 http://schema.datacite.org/meta/kernel-4.1/metadata.xsd">
  <identifier identifierType="URL">https://aperta.ulakbim.gov.tr/record/11001</identifier>
  <creators>
    <creator>
      <creatorName>Canbek, Ogulcan</creatorName>
      <givenName>Ogulcan</givenName>
      <familyName>Canbek</familyName>
      <affiliation>Middle East Tech Univ, Dept Civil Engn, Dumlupinar Bulvari, TR-06800 Ankara, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Shakouri, Sahra</creatorName>
      <givenName>Sahra</givenName>
      <familyName>Shakouri</familyName>
      <affiliation>Middle East Tech Univ, Dept Civil Engn, Dumlupinar Bulvari, TR-06800 Ankara, Turkey</affiliation>
    </creator>
    <creator>
      <creatorName>Erdogan, Sinan T.</creatorName>
      <givenName>Sinan T.</givenName>
      <familyName>Erdogan</familyName>
      <affiliation>Middle East Tech Univ, Dept Civil Engn, Dumlupinar Bulvari, TR-06800 Ankara, Turkey</affiliation>
    </creator>
  </creators>
  <titles>
    <title>Laboratory Production Of Calcium Sulfoaluminate Cements With High Industrial Waste Content</title>
  </titles>
  <publisher>Aperta</publisher>
  <publicationYear>2020</publicationYear>
  <dates>
    <date dateType="Issued">2020-01-01</date>
  </dates>
  <resourceType resourceTypeGeneral="Text">Journal article</resourceType>
  <alternateIdentifiers>
    <alternateIdentifier alternateIdentifierType="url">https://aperta.ulakbim.gov.tr/record/11001</alternateIdentifier>
  </alternateIdentifiers>
  <relatedIdentifiers>
    <relatedIdentifier relatedIdentifierType="DOI" relationType="IsIdenticalTo">10.1016/j.cemconcomp.2019.103475</relatedIdentifier>
  </relatedIdentifiers>
  <rightsList>
    <rights rightsURI="http://www.opendefinition.org/licenses/cc-by">Creative Commons Attribution</rights>
    <rights rightsURI="info:eu-repo/semantics/openAccess">Open Access</rights>
  </rightsList>
  <descriptions>
    <description descriptionType="Abstract">A drawback of conventional calcium sulfoaluminate (CSA) cement production is the use of the costly raw material bauxite as a source of alumina to form the main clinker phase ye'elimite. Replacement of bauxite with industrial wastes can benefit CSA cements economically and environmentally. This study demonstrates the use of high amounts of red mud, a sulfate-rich/high-lime fly ash, and desulfogypsum as raw materials in producing CSA clinkers and cements with better mechanical performances than an all-natural raw material CSA reference cement. Mineralogical compositions of the clinkers and hydrated cement pastes were investigated using x-ray diffraction, isothermal calorimetry, thermogravimetric analysis and scanning electron microscopy. Compressive strength development of mortars, made with citric acid, were studied up to 28 d. It was found that increasing fly ash increases the belitic nature, and increasing red mud increases the terrific nature of the clinkers. Mortars with 28-d strengths exceeding 40 MPa could be made with cements containing similar to 38% waste and only half the bauxite in the reference. Medium early and ultimate strength mortars could be made with a similar to 55% waste cement when bauxite was reduced to a quarter of the reference, with small additions of Ca(NO3)(2)center dot 4H(2)O or Li2CO3. Desulfogypsum, as a source of sulfates, was more beneficial to strength development than natural gypsum. Ye'elimite reactivity was enhanced in red-mud containing cements. Cements with both fly ash and red mud experienced lower carbonation than those made with only one of the two wastes.</description>
  </descriptions>
</resource>