Dergi makalesi Açık Erişim

Sources of performance degradation in thin film La0.6Sr0.4FeO3 air electrodes

Demirkal, Emrah; Ozdemir, Okan; Arslan, Leyla Colakerol; Buyukaksoy, Aligul


Dublin Core

<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:creator>Demirkal, Emrah</dc:creator>
  <dc:creator>Ozdemir, Okan</dc:creator>
  <dc:creator>Arslan, Leyla Colakerol</dc:creator>
  <dc:creator>Buyukaksoy, Aligul</dc:creator>
  <dc:date>2020-01-01</dc:date>
  <dc:description>Origins of long-term oxygen reduction activity degradation at 700 degrees C in polymeric precursor-derived La0.6Sr0.4FeO3 (LSF) thin film cathodes were investigated. Electrochemical impedance spectroscopy measurements revealed that the LSF thin films pre-calcined at 900 degrees C (LSF-900) exhibited much faster electrochemical activity loss than did LSF pre-calcined at 700 degrees C (LSF-700). As similar losses in surface area were determined upon scanning electron microscopy image analyses of samples, microstructure evolution was excluded as a possible reason for the difference in degradation rates. Upon X-ray diffraction analyses and comparison of results with literature, it was suggested that small amounts of Ruddlesden-Popper type (La, Sr)(2)FeO4 (214) phases were present throughout the 100 hour exposure of both LSF-700 and LSF-900 to 700 degrees C, thus not affecting the long-term performance degradation rates. X-ray photoelectron spectroscopy analyses revealed that the ratio of surface-bound Sr to the lattice-bound one increased significantly in LSF-900, suggesting electrochemically inactive SrO/Sr(OH)(2)/SrCO3 rich layer formation and thus contributing to fast activity loss. Overall, it was established that microstructural evolution was not the sole source of degradation in LSF-based cathodes. Since LSF thin films deposited by a solution precursor onto YSZ electrolytes constitute a model structure, the results obtained in the present study can also provide useful information on the degradation of LSF-YSZ composite cathodes prepared by LSF infiltration into YSZ scaffolds.</dc:description>
  <dc:identifier>https://aperta.ulakbim.gov.trrecord/10615</dc:identifier>
  <dc:identifier>oai:zenodo.org:10615</dc:identifier>
  <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
  <dc:rights>http://www.opendefinition.org/licenses/cc-by</dc:rights>
  <dc:source>SOLID STATE IONICS 355</dc:source>
  <dc:title>Sources of performance degradation in thin film La0.6Sr0.4FeO3 air electrodes</dc:title>
  <dc:type>info:eu-repo/semantics/article</dc:type>
  <dc:type>publication-article</dc:type>
</oai_dc:dc>
30
11
görüntülenme
indirilme
Görüntülenme 30
İndirme 11
Veri hacmi 1.9 kB
Tekil görüntülenme 30
Tekil indirme 11

Alıntı yap