1 Ocak 2012 Dergi makalesi Açık Erişim

Gulsoy, H. Ozkan; Gunay, Volkan; Baykara, Tarik; German, Randall M.

MARC21 XML

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Injection Molding of Mechanical Alloyed Ti-Fe-Zr Powder</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="4">
    <subfield code="p">MATERIALS TRANSACTIONS</subfield>
    <subfield code="v">53</subfield>
    <subfield code="n">6</subfield>
    <subfield code="c">1100-1105</subfield>
  </datafield>
  <controlfield tag="001">104739</controlfield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">user-tubitak-adresli-yayinlar</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">This study focuses on the injection molding of mechanical alloyed Ti-Fe-Zr alloys. Injection molded samples were produced using mechanical alloying based on hydride-dehydride (HDH) titanium and pure iron and zirconium powders. Mechanical alloyed powders were mixed with a polymeric binder and hot injection molded to form standard tensile bars. The critical powder loading for injection molding was 50 vol% for feedstock. Molded bars were debound by solvent and then thermal steps, under ultra pure argon. Debound samples were sintered at 1300 C for 60 min in a high level vacuum (10(-5) mbar). After sintering, the performances of the sintered materials was characterized using tensile and hardness testing, optical microcopy (OM) and scanning electron microscopy (SEM). The strengths and weaknesses of the test conditions have been analyzed from the microstructure and mechanical properties. Theoretical density, ultimate tensile strength, and hardness of injection molded Ti powders increased with the additions of 5%Fe and 5%Zr. [doi:10.2320/matertrans.M2012031]</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="2">opendefinition.org</subfield>
    <subfield code="a">cc-by</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Mat Inst, TUBITAK MRC, TR-41470 Gebze, Turkey</subfield>
    <subfield code="a">Gunay, Volkan</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Mat Inst, TUBITAK MRC, TR-41470 Gebze, Turkey</subfield>
    <subfield code="a">Baykara, Tarik</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">San Diego State Univ, San Diego, CA 92182 USA</subfield>
    <subfield code="a">German, Randall M.</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="b">article</subfield>
    <subfield code="a">publication</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="a">Gulsoy, H. Ozkan</subfield>
  </datafield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2012-01-01</subfield>
  </datafield>
  <controlfield tag="005">20210316152058.0</controlfield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="o">oai:zenodo.org:104739</subfield>
    <subfield code="p">user-tubitak-adresli-yayinlar</subfield>
  </datafield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="z">md5:b60e7c735e70114fcb1e10ced9ee0a4a</subfield>
    <subfield code="s">154</subfield>
    <subfield code="u">https://aperta.ulakbim.gov.trrecord/104739/files/bib-b0246bfd-af93-43af-94b1-da5a0730516f.txt</subfield>
  </datafield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="u">http://www.opendefinition.org/licenses/cc-by</subfield>
    <subfield code="a">Creative Commons Attribution</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.2320/matertrans.M2012031</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
</record>