Establishment of All Digital Closed-Loop Interferometric Fiber-Optic Gyroscope and Scale Factor Comparison for Open-Loop and All Digital Closed-Loop Configurations

This paper covers the design details of an all digital closed-loop interferometric fiber-optic gyroscope (ADCL-IFOG) prototype, constructed in TUBITAK UME, and scale factor comparison between open-loop and ADCL-IFOG prototypes with sine wave biasing modulation. The output of demodulation circuit, proportional to the applied rotation rate, was sampled by AD7714YN analog-to-digital converter (ADC), operated in 1.6 bit resolution. Error voltage, generated by microcomputer - controlled LTC 1667CG, 14 bit digital to analog converter (DAC), was sent to the phase modulator through a linear summing circuit to make Sagnac Phase Shift zero, depending on the rotation direction. For this implementation, the ultimate rotation rate of 1.84 (degrees/h) was nullified. The averaged sensitivity of the proposed closed-loop IFOG in unit of error voltage applied to the phase modulator was determined as 132.65 mu V/(degrees/h). The scale factors of both the open-loop and ADCL-IFOG prototypes were compared in a range of 1-15270 (degrees/h) rotation rate, corresponding to Sagnac Phase Shifts varying from 0.00115 (degrees) to 17.57448 (degrees). The maximum peak to peak noise and the bias stability of ADCL-IFOG prototype were determined as 4.97 (degrees/h) and 1.48 (degrees/h) at 23.0 degrees C, respectively.