Applications on Three-Dimensional Mixed Mode Fatigue Crack Propagation Using Fracture and Crack Propagation Analysis System (FCPAS)

In this study, results from two applications on three-dimensional fatigue crack propagation using the in-house developed "Fracture and Crack Propagation Analysis System (FCPAS)" are presented. FCPAS uses finite element models to calculate threedimensional mixed mode stress intensity factors and other sub-modules to predict shapes of the incrementally growing crack fronts and the resulting fatigue crack propagation lives. The evolving crack surfaces are generated by successively adding the incremental growth surfaces and re-meshing and re-solving the finite element model using the standalone program FRAC3D, a finite element-based standalone program employing three-dimensional enriched finite elements. The results show that the fracture surfaces evolve into a mode-I type three-dimensional crack as expected. Very good agreements are obtained between the results of the current studies and those of numerical applications in terms of both evolving crack surfaces and crack propagation lives. Therefore, it is concluded that the applied method is capable of accurately predicting linear elastic three-dimensional mixed mode fatigue crack propagation problems. (c) 2019 The Authors.Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/ Peer-review under responsibility of the 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials organizers