Yayınlanmış 1 Ocak 2017
| Sürüm v1
Dergi makalesi
Açık
Ballistic investigation of polymer bonded borided steel sheets
Oluşturanlar
- 1. Gebze Tech Univ, Dept Mat Sci & Engn, Gebze, Turkey
- 2. Turkish Naval Acad, Dept Naval Architecture, Istanbul, Turkey
- 3. Gebze Tech Univ, Dept Mech Engn, Gebze, Turkey
Açıklama
In this study, it was aimed to produce composite laminates of boronized AISI-1010 steel plates as an alternative protection against the threat level BR-2 defined in the EN-1063 standard. Cold rolled AISI-1010 steel plates were cut into hexagonal plates with 45 mm diagonals. These hexagonal plates were boronized by pack boronizing method at 950 degrees C for 3 h. The characterization of the boronized samples was carried out by SEM-EDS, XRD, and Vickers microhardness measurement. Composite laminates having two different thicknesses were produced by bonding boronized AISI-1010 steel plates with a binary component acrylic adhesive and pressing. Armor plates were produced by combining hexagonal composite laminates together on a thin kevlar sheet to provide the necessary integrity. The ballistic tests of these plates were performed for the threat level BR-2 defined in the EN-1063 standard.
Dosyalar
bib-9f249688-4bad-4bca-a9b1-6c7294f17cd7.txt
Dosyalar
(231 Bytes)
| Ad | Boyut | Hepisini indir |
|---|---|---|
|
md5:c7acde4983615f6834bdef03b79416a8
|
231 Bytes | Ön İzleme İndir |