Flame behaviour and flame location in large-eddy simulation of the turbulent premixed combustion

The lean premixed flame of a fuel mixture in a jet flow combustor was computationally investigated, and results were compared with experimental data at a constant thermal load of 9 kW and constant equivalence ratio of 0.588. Three variables, namely, the amplitude of pulsation, frequency of thorn , and the mass flow rate ratio (MFRR) of the inlet region, were considered to describe the turbulent effect and investigate the topology and location of the flame that represent the characteristics of sinusoidal wave inlet velocity. Results showed that flame topology strongly depended on varying the turbulence parameters examined, especially f and MFRR. The V-shaped flame with corrugated wings formed in the vicinity of the flame holder reflected the turbulence-combustion interaction in all test cases. The suggested large-eddy simulation (LES) model was suitable in predicting the flame location and flame topology associated with pulsating jet flow. (C) 2021 Elsevier Ltd. All rights reserved.