Yayınlanmış 1 Ocak 2011
| Sürüm v1
Dergi makalesi
Açık
Influence of SiC addition on tribological properties of SiAlON
Oluşturanlar
- 1. CSIR, Cent Glass & Ceram Res Inst, Kolkata 700032, India
- 2. IIT Kanpur, Lab Biomat, Dept Mat Sci & Engn, Kanpur, Uttar Pradesh, India
- 3. Bilecik Univ, Dept Mech & Mfg Engn, Bilecik, Turkey
- 4. Anadolu Univ, Dept Mat Sci & Engn, Eskisehir, Turkey
- 5. Sabanci Univ, Istanbul, Turkey
Açıklama
The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 degrees C; relative humidity 50-55%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Dosyalar
bib-a0f22801-bd1d-4dd9-973e-f45de237e9f9.txt
Dosyalar
(191 Bytes)
| Ad | Boyut | Hepisini indir |
|---|---|---|
|
md5:a01f8e1c88f0d73b620fc12a046c7092
|
191 Bytes | Ön İzleme İndir |