Yayınlanmış 1 Ocak 2017
| Sürüm v1
Konferans bildirisi
Açık
A PARYLENE BONDING BASED FABRICATION METHOD FOR GRAVIMETRIC RESONANT BASED MASS SENSORS
Oluşturanlar
- 1. Middle East Tech Univ, Ankara, Turkey
- 2. Mikro Biyosistemler Elekt Sanayi & Ticaret AS, Ankara, Turkey
- 3. METU MEMS Res & Applicat Ctr, Ankara, Turkey
Açıklama
In this study, a fabrication method utilizing parylene bonding for gravimetric resonant based mass sensors is presented. First, parylene bonding was experimentally tested and compared with the literature. Average shear strength was measured as 16.3 MPa (sigma=3MPa). Then, resonators located on top of a microchannel for real-time detection were fabricated using the presented method. Simulations and experiments verify proper operation of the fabricated resonators, and the applicability of the method for fabricating similar resonant based sensors.
Dosyalar
bib-24fd2380-b6d5-438a-95d0-3560d5d67e5d.txt
Dosyalar
(281 Bytes)
| Ad | Boyut | Hepisini indir |
|---|---|---|
|
md5:4e4d7174615a02e6f5dd003f982ce830
|
281 Bytes | Ön İzleme İndir |